RERA Registered · Possession 2030

BPTP Wa Vana Plot Numbering

BPTP Wa Vana plot numbering decides how each of the 157 residential plots is identified on the layout, in the allotment letter and in the registry. The numbering chart is not public yet. This page explains how plot numbers normally work and how to check yours.

The basics

What Plot Numbering Means at BPTP Wa Vana


Every plot in a planned layout gets a number. That number is the plot's name on paper. It appears on the approved layout drawing, in the allotment letter, in the agreement for sale and later in the sale deed. If the number is wrong or unclear anywhere along that chain, you can end up paying for one plot and being shown another.

BPTP Wa Vana is a gated residential plotted development of 14.95 acres in Sector 80, Faridabad, with 157 residential plots as per the developer's project page. Plot sizes are said to start from 280 sq. yards. With a fixed number of plots, numbering is usually simple, but the way it is done tells you a lot about how the layout was drawn.

A plot number is not a ranking. Plot 1 is not better than plot 157. Numbers are assigned for record keeping, often starting at one entrance or one corner and moving across the layout in a set direction. Location inside the project, road width, facing and nearness to the central forest are what change the value of a plot.

For a buyer, the practical point is simple. Do not choose a plot from a number alone. Choose it from the number, the area, the facing and the position on the approved drawing, all read together.

Known so far

What BPTP Has and Has Not Published About Plot Numbers


As per BPTP's launch announcement and project page, the following are public:

  • Total of 157 residential plots on 14.95 acres
  • Plot sizes starting from 280 sq. yards
  • A central Japanese forest of about one acre as the heart of the community
  • A DTCP layout plan reference on the project page, subject to final approvals

The following are not published anywhere we could verify: the plot number series, the number of plots per block, plot dimensions, facing of each plot, which plots are corner plots and which are already booked. We will not guess these. Any chart you see on a third-party site or a social post should be treated as unconfirmed until the developer gives you the same chart in writing.

The approved layout is the document that fixes plot numbers. You can read how that drawing differs from a marketing sketch on the BPTP Wa Vana layout plan page.

Ask for the numbered layout drawing along with the brochure.

BPTP Wa Vana Plot Numbering: representative view of the BPTP Wa Vana plotted development in Sector 80, Faridabad
Representative image. Final layout, landscape and finishes are subject to developer confirmation.
Common methods

How Plot Numbers Are Usually Assigned in a Plotted Community


Developers in Haryana follow a few common patterns. Knowing them helps you read the chart when it arrives.

Single running series

Plots are numbered 1 to 157 in one sequence, usually following the internal roads. This is the simplest method and suits a project of this size.

Block and number

The layout is split into blocks and each block restarts at 1, such as A-1, A-2, B-1. Blocks often follow road loops or the edges of a central open space. If Wa Vana uses blocks, expect them to relate to the forest and the entrance.

Sector or phase prefix

Larger townships sometimes add the sector or phase to the number. Since this precinct sits inside a bigger BPTP layout in Sector 80, a prefix is possible, though nothing has been confirmed.

Whichever method is used, ask for a legend. A good plan has a key that shows plot number, area in sq. yards, dimensions, facing and road width on one page.

Illustration only

A Sample Plot Number Table for BPTP Wa Vana Buyers


The table below shows how a clear plot schedule is laid out. Every value is invented to show the format. It is an illustration, not a BPTP Wa Vana plot list, and none of these plots are real.

Illustration of a plot schedule format, not Wa Vana data
Plot no.Area (sq. yd)Size (ft)FacingRoad width
Sample 01XXXXX x XXEastXX ft
Sample 02XXXXX x XXNorthXX ft
Sample 03XXXXX x XXWestXX ft

When BPTP shares the real schedule, check that each row has all five columns filled. A blank column is a question to raise before any payment.

Checklist

How to Verify Your BPTP Wa Vana Plot Number


Do this each time a number is quoted to you, whether by a sales executive, a channel partner or a document.

  1. Get the plot number in writing on the developer's letterhead or booking form.
  2. Match it to the approved layout drawing, not a brochure sketch.
  3. Check area and dimensions against the same row in the plot schedule.
  4. Look up the project on the regulator portal at haryanarera.gov.in and confirm the registration details.
  5. On a site visit, ask to see the plot marked on the ground or on a ground-fixed plan.
  6. Keep a signed copy of the page that shows your plot.

Ground marking may not exist in an early launch phase. If so, ask when pegging will be done and who will certify it.

See how the layout is marked at the site before you commit.

Avoid these

Common Plot Numbering Mistakes Buyers Make at BPTP Wa Vana


  • Assuming a low number means a better location
  • Accepting a verbal plot number without a written allotment
  • Using a marketing render to pick a plot, when renders are artistic impressions
  • Not checking whether the number on the booking form matches the number on the agreement for sale
  • Ignoring revised layouts, since an approved layout can be changed later and numbers may shift
  • Paying a token amount before seeing the plot's area and dimensions in writing

The last point matters most. A number alone tells you nothing about size or shape. Always read it together with area, dimensions and facing.

Renderings and plans on any marketing material are artistic impressions. Final terms are in the allotment letter and agreement for sale, and approvals may change.
Next steps

What to Ask BPTP About Plot Numbering Before You Book


Take this short list to your first conversation with the BPTP team.

  • Can I have the approved layout with plot numbers, areas and dimensions?
  • What numbering method is used, and is there a block or phase prefix?
  • Will numbers change if the layout is revised?
  • How will my plot be pegged and handed over on the ground?
  • Is the number on my booking form the same one that will go in the agreement for sale?

Write down the names of the people who answer and the date. If an answer is not available yet, ask when it will be. It is fair for a buyer to wait for the numbered layout before choosing a plot.

Price for any given plot is on request. *Indicative, subject to developer confirmation.

Send your question and the team will reply with what is released.

Get the BPTP Wa Vana Numbered Plot Layout

Share your details and the team will send the layout and plot schedule as and when they are released. Pricing is on request.

Buyer Questions

BPTP Wa Vana Plot Numbering: Frequently Asked Questions


Short answers to the questions buyers ask most often on this topic.

A public numbered plot chart has not been released as far as we can verify. The developer's project page confirms 157 plots on 14.95 acres. Ask BPTP for the approved layout with plot numbers, areas and dimensions, and treat anything else as unconfirmed until it comes in writing. Keep a dated copy of whatever you receive, and compare it with later versions so you can spot changes early. Keep every written reply from the sales team in one folder.

No. Plot numbers are for record keeping and usually follow the order in which the layout was drawn. Value depends on location inside the project, facing, road width, shape and distance from the central forest, so compare these details instead of the number. If a salesperson quotes a different number, ask for it in writing and treat the written, signed document as the one that counts. If two plots look equal on paper, compare them on site.

It can if the layout is revised or re-approved, or if a plot is swapped by agreement. Ask the developer how changes are handled and make sure the plot number is written in the booking form and again in the agreement for sale before you pay further instalments. A lawyer can compare the DTCP reference with the public record in a short review, which is a sensible step before any payment. Also ask for a dated version number on every layout copy.

Match the number across the booking form, the approved layout drawing and the agreement for sale. Check the project details on haryanarera.gov.in, and ask to see the plot on the ground or on a pegged plan during your site visit. Ask which drawing each page of your agreement refers to, so there is no doubt about which version binds both sides. Keep a counter-signed copy so both sides hold the same details.

This has not been published. Sizes are said to start from 280 sq. yards, but the split of plots by size and block is not public. Ask for the plot schedule, which should list every number with its area and dimensions. Also ask whether you will be told in writing about any revision and whether you get a right to object or withdraw. Ask for a dated, printed copy, since lists can be updated.

Next Step

Talk to a BPTP Wa Vana Property Expert


Tell us what you are looking for and we will share the plot options, current information and a time for a site visit.

  • Plot sizes starting from 280 sq. yards
  • Indicative price on request
  • Brochure when released
  • Site visit at a time that suits you

Request a Callback

Share your details and a property expert will get back to you with the current information.

Please enter your name.
Enter a valid 10-digit Indian mobile number.
Enter a valid email address.

Your details are used only to respond to this enquiry. Pricing shared is indicative and subject to developer confirmation.