RERA Registered · Possession 2030

BPTP Wa Vana Corner Plots

BPTP Wa Vana corner plots are plots that sit at a junction of two internal roads in the Sector 80 gated community. The developer has not published which of the 157 plots are corners. This page explains the benefits, the limits, and what to ask before you pay for one.

Definition

What a corner plot means at BPTP Wa Vana


A corner plot has two sides open to roads or open spaces. Most plots in a grid layout have neighbours on both sides and a road in front. A corner plot has a road at the front and a second road, or open space, along one side. Keep this in mind while you read about corner plots: BPTP Wa Vana is still an upcoming launch and details can change.

That gives it a different feel. More light and air come in. The plot is seen from two directions. It is also exposed to more movement of people and vehicles.

BPTP describes Wa Vana as a plotted community of 157 plots, with sizes starting from 280 sq. yards, within a gated precinct. The developer has not published the plot numbers that are corners, the count, or any special pricing. Everything below is general guidance for plotted layouts, applied to what Wa Vana has said publicly.

Do not confuse corner with a plot beside the forest or a park. Those are separate positions with their own pages in the layout section.

Upsides

Benefits of a BPTP Wa Vana corner plot


Corner plots are popular for a few practical reasons.

  • Two open sides bring more daylight and cross-ventilation.
  • The house can have a front elevation on two sides, which many buyers like.
  • Parking and entry can be placed on either road.
  • There are fewer shared walls with neighbours, so more privacy on one side.
  • In many markets, corners are seen as a premium position at resale, though this is not guaranteed.

These benefits depend on the layout. In a layout with narrow roads and a quiet internal grid, a corner can be pleasant. In a layout where one road is a main spine, it can be busy.

The position also gives design flexibility. A buyer can plan a garden wing on the open side, or a separate entrance for a home office.

Ask which plot numbers are corners.

BPTP Wa Vana Corner Plots: representative view of the BPTP Wa Vana plotted development in Sector 80, Faridabad
Representative image. Final layout, landscape and finishes are subject to developer confirmation.
Trade-offs

Drawbacks to weigh on BPTP Wa Vana corner plots


A corner is not always better. Here are the common downsides.

Extra setback and less buildable area

Rules usually ask for open space on both road sides. That can cut the buildable area compared with a mid-block plot of the same size. A 280 sq. yard corner plot may allow a smaller footprint than a 280 sq. yard plot in the middle of a row.

More noise and passing traffic

Two roads mean more people looking in and more sound from vehicles turning at the junction.

Higher boundary cost

You need to build and maintain a longer boundary wall and may need extra security cover on the open side.

Premium price

Developers often charge more for corners. Whether BPTP does at Wa Vana is not public. Pricing is on request. *Indicative, subject to developer confirmation.

One more cost is easy to miss. A plot with two road sides usually needs a boundary wall and gate on both, and the side facing the second road often needs the same finish as the front. Budget for that early, and ask your architect to show both elevations in the cost estimate.

Drainage and utility lines can also run along the side road. Ask where they sit, because a manhole or an electrical box beside your plot affects both looks and access.

Worked example

A worked illustration of corner plot setbacks at BPTP Wa Vana


This illustration uses made-up setback values to show the effect. They are not Wa Vana rules.

Illustration, not a Wa Vana rule. Suppose a 280 sq. yard plot is 35 feet wide and 72 feet deep, with 2,520 square feet of land. Assume a required open strip of 10 feet at the front and 5 feet on each side that touches a road, with 5 feet at the rear. Compare a mid-block plot with a corner plot.

Illustration only: setback effect on a 35 by 72 feet plot
ItemMid-block plotCorner plot
Plot width available to build35 ft minus side gaps35 ft minus gaps on both sides
Side open strips assumedOne side, 5 ftBoth sides, 5 ft each
Buildable width30 ft25 ft
Buildable depth (72 minus 10 front, 5 rear)57 ft57 ft
Footprint1,710 sq. ft1,425 sq. ft

In this made-up case the corner plot loses about 285 square feet of footprint. Real rules for Wa Vana will differ. The point is to ask for them and do the same sum on your plot.

Choosing

How to decide whether a BPTP Wa Vana corner plot suits you


Run through these questions.

  1. Do you value light, ventilation and a double frontage more than a larger footprint?
  2. Are the two roads wide or narrow, busy or quiet?
  3. Is the plot size large enough that setbacks leave a workable house?
  4. How much extra is the price, and is it justified by what you gain?
  5. Does your family need privacy on all sides?

If quiet and privacy are your priority, a mid-block plot or one on a calm lane may fit better. If you want a stronger street presence and more air, a corner can work well.

For the wider choice of positions, the plot facing guide for BPTP Wa Vana sets out direction and position in one place. You can also read about road facing plots at BPTP Wa Vana if you are comparing a corner with a plot on a single road.

Stand at the junction and judge the noise and light.

Verification

How to verify a BPTP Wa Vana corner plot claim


Anyone can call a plot a corner. Check it.

  • Ask for the sanctioned layout and read the road widths on both sides.
  • Confirm that both sides are actual roads or open space, not a private boundary.
  • Ask whether either side is a service lane, a utility strip or a future road.
  • Ask if the corner is rounded or cut, and how that affects the area.
  • Check the plot number against the allotment letter.
  • Check the registration on the Haryana RERA portal, since the header number HRERA-PKL-FBD-939-2026 and the project page text differ slightly.

A cut corner is common at junctions. It trims a small triangle off the plot for turning space, and it can change the registered area.

Pitfalls

Mistakes to avoid when buying a BPTP Wa Vana corner plot


These come up often.

  • Paying a premium without a written reason.
  • Ignoring the setback on the second side.
  • Not checking what the second road is for.
  • Assuming a corner means a bigger plot. It does not.
  • Forgetting the extra boundary wall and gate cost.
  • Taking a brochure drawing as the approved layout.

Renderings are artistic impressions. Plot positions and charges are subject to developer confirmation and final approvals.

Ask BPTP

What to ask BPTP about BPTP Wa Vana corner plots


Put these in one message and keep the answers.

  1. Which plot numbers are corner plots, and how many are there?
  2. What is the premium for a corner, if any?
  3. What are the setbacks on both road sides?
  4. Are any corners cut, and by how much?
  5. What are the widths of both roads?
  6. Are corner plots available now? See also how availability is handled in the plot availability page for BPTP Wa Vana.

Pricing is on request. *Indicative, subject to developer confirmation. Possession is expected in 2030, as per the developer.

Start with the plot layouts section for BPTP Wa Vana if you want to see how all these drawings connect.

We will pass your questions to the developer.

Ask about BPTP Wa Vana corner plots

Tell us the size you want and we will ask the developer which corner plots exist and what they cost. Pricing is on request.

Buyer Questions

BPTP Wa Vana Corner Plots: Frequently Asked Questions


Short answers to the questions buyers ask most often on this topic.

The developer has not published which of the 157 plots are corners, or how many exist. Most plotted layouts have some. Request the sanctioned layout and plot schedule, and ask BPTP to mark corner plots on the drawing. Confirm the position again in your allotment letter, since a corner label affects both price and buildable area. Ask for the answer in writing and keep it with your other papers.

No premium schedule is public. Pricing is on request. *Indicative, subject to developer confirmation. Many developers charge a preferential location charge for corners, parks or wide roads. Ask BPTP whether one applies, how it is calculated, and whether it appears as a separate line in the cost sheet for your plot. Keep the reply with your allotment papers so you can compare it later.

Not by default. A corner plot of 280 sq. yards has the same land as any other 280 sq. yard plot. Corners often need extra setback on the second road side, so the buildable area can be smaller. Some corners are also cut at the junction. Check the registered area on the drawing. Check each point against the sanctioned layout before you rely on it.

They are often seen as a desirable position, but resale value depends on the market, the road, the neighbourhood and the price you paid. There is no guaranteed return from any plot. Treat a corner as one factor among many, and judge it on how you will use it, not on a promise of future gains. A short written reply from the developer is worth more than a verbal promise.

It can be, because two roads mean more passing movement and sound at the junction. In a quiet internal grid with narrow roads, the effect may be small. Visit at different times of day, stand at the exact spot, and listen. Ask which road is the main spine and which is a quiet lane. Do this for every plot you shortlist, since each plot can differ.

Check the sanctioned layout plan, not a marketing image. Both sides should be roads or open space shown on the approved drawing. Confirm on site with the boundary pillars, and match the plot number to the allotment letter. Ask whether the corner is cut and how that changes the registered area. Keep dated copies of everything you receive, so any change is easy to spot.

Next Step

Talk to a BPTP Wa Vana Property Expert


Tell us what you are looking for and we will share the plot options, current information and a time for a site visit.

  • Plot sizes starting from 280 sq. yards
  • Indicative price on request
  • Brochure when released
  • Site visit at a time that suits you

Request a Callback

Share your details and a property expert will get back to you with the current information.

Please enter your name.
Enter a valid 10-digit Indian mobile number.
Enter a valid email address.

Your details are used only to respond to this enquiry. Pricing shared is indicative and subject to developer confirmation.