RERA Registered · Possession 2030

BPTP Wa Vana Plot Dimensions

BPTP Wa Vana plot dimensions are not published plot by plot yet. What is public is that the 157 freehold plots in Sector 80 start from 280 sq. yards. This page shows how to read length, width and shape, and what to ask before choosing a plot.

Known so far

What BPTP has said about BPTP Wa Vana plot dimensions


As per BPTP's launch announcement, Wa Vana is a residential plotted development on 14.95 acres with 157 plots. Plot sizes start from 280 sq. yards. The plots are freehold.

That is all the public record says about size. There is no published list of plot numbers with length, width or area. There is no count of how many plots fall in each size band, and no statement on whether sizes jump in fixed steps or vary freely.

This is normal for an early launch. Detailed schedules usually come with the sanctioned layout and the allotment process. But it means any specific dimension you hear today, such as a plot being exactly 40 by 63 feet, should be treated as unconfirmed until it appears in a document.

Plot size information for BPTP Wa Vana
DetailStatus
Smallest plotFrom 280 sq. yards, as per developer
Largest plotNot yet released
Length and width of each plotNot yet released
Number of plots in each size bandNot yet released
Price per plotOn request. *Indicative, subject to developer confirmation

Ask for the plot-wise sizes in writing.

The maths

How plot dimensions work for a BPTP Wa Vana plot


Plot size in north India is quoted in square yards. A plot has a frontage, which is the side that faces the road, and a depth, which runs back from the road. Area is frontage times depth.

One square yard is 9 square feet. So a 280 sq. yard plot is 2,520 square feet, or about 234 square metres. Here is a worked illustration. This is not a Wa Vana plot, only a way to see how the numbers fit.

Illustration, not a Wa Vana dimension: a plot with a frontage of 35 feet and a depth of 72 feet covers 2,520 square feet, which is 280 sq. yards. A plot with a frontage of 42 feet and a depth of 60 feet also covers 2,520 square feet. The area is identical, but the two plots feel very different to build on.

The first is long and narrow. The second is wider and shallower. Neither is better in general. It depends on how you want to place rooms, a garden and parking.

Square yard conversions (general reference, not Wa Vana plot sizes)
Square yardsSquare feetSquare metres (approx.)
2802,520234
3002,700251
4003,600334
5004,500418

For the pricing side of size, the page on BPTP Wa Vana plot sizes and what they cost explains how area turns into a total payable amount.

Shape matters

Why shape and proportion matter more than the headline number


Two plots with the same area can differ a lot in usefulness. Look at three things beyond area.

Frontage to depth ratio

A ratio near 1 to 1.5 gives flexible design options. Very deep and narrow plots limit natural light in the middle of the house. Very wide and shallow plots can leave little room at the back.

Regular or irregular edges

Rectangles are the easiest to design on. Plots at road bends, culs-de-sac or junctions can have angled sides. These are not bad, but the usable area after setbacks may be lower than the registered area suggests.

Setbacks and building envelope

Local rules set how far a building must stay from each boundary. Those open strips come out of your plot. A 280 sq. yard plot does not give you 280 sq. yards of floor space on each level. Ask BPTP for the permitted ground coverage and floor area ratio, and have an architect run a sample plan.

If you are weighing between sizes, see also how plot area is measured at BPTP Wa Vana. It deals with the difference between registered area, usable area and what you can build.

Direction

How facing and orientation change the dimensions you need


The direction your plot faces affects how a given set of dimensions plays out. A narrow plot facing east gets morning light at the front. The same plot facing north gets softer, steadier light. Rooms placed at the back of a deep plot may need courtyards or light wells.

Facing is a separate question from size, and it has its own page. Start with the guide to plot facing at BPTP Wa Vana if you care about direction, vastu or sunlight. Facing is also tied to whether a plot sits on a road, a corner or a park edge, which changes which side is the front.

For now, the key point is simple. Do not pick a size in isolation. Pick a size, a shape and an orientation together, then test that combination against your intended house.

  • Draw your wish list of rooms and parking.
  • Ask an architect for the minimum frontage that suits it.
  • Use that frontage as your filter when the plot schedule arrives.
Before you choose

A dimension checklist for your BPTP Wa Vana shortlist


When the plot schedule arrives, check each shortlisted plot against this list.

  1. Registered area in square yards and in square feet.
  2. Length and width on all four sides, not only frontage and depth.
  3. Whether the plot is a regular rectangle or has angled edges.
  4. Width of the road it faces.
  5. Neighbouring plots and any green belt or utility strip nearby.
  6. Permitted setbacks, ground coverage and height.
  7. Whether the stated area is the same in the allotment letter and the layout drawing.

If two documents disagree, stop and ask for a written correction. Small differences in a plot can mean large differences in the money you pay.

Also ask whether boundary pegs will be handed over, and whether measured area is confirmed on the ground before registration.

Measure the plot on the ground with the drawing beside you.

Avoid these

Common mistakes with BPTP Wa Vana plot dimensions


Most dimension problems are small oversights. They show up only when someone starts to design the house.

  • Comparing plots only by area and ignoring frontage.
  • Assuming the whole plot area can be built on.
  • Believing verbal dimensions that are not in the agreement.
  • Forgetting the extra space needed for parking and a driveway.
  • Choosing a corner or edge plot without checking how the setbacks shift.
  • Not checking whether the plot is slightly irregular on the ground.

A simple fix is to ask for a dimensioned drawing of your exact plot, signed or stamped by the developer, before you pay any booking amount. If this cannot be provided, ask why, and when it will be.

Plot sizes, layouts and amenity images are subject to developer confirmation and final approvals. Renderings are artistic impressions.

Ask BPTP

What to ask BPTP about BPTP Wa Vana plot dimensions


Short, clear questions get clearer answers. Send these through the enquiry form and keep the replies.

  • What is the full range of plot sizes, from smallest to largest?
  • How many plots are in each size band?
  • Can I get length and width for each shortlisted plot?
  • Is the area quoted the registered area or a super area?
  • Are there any plots with irregular boundaries?
  • What are the setback rules and the permitted built-up area?

The overall plot layout section for BPTP Wa Vana links to every layout topic, so you can move from size to facing to numbering without losing track.

Possession is expected in 2030, as per the developer, and that date can change. Prices are on request. *Indicative, subject to developer confirmation.

Tell us the size you want and we will ask for it.

What next

Next steps for choosing a BPTP Wa Vana plot size


You can make steady progress even before the full schedule is out.

  1. Decide your minimum frontage and depth with an architect.
  2. Ask BPTP for the plot schedule and the sanctioned layout.
  3. Shortlist plots that meet your frontage and facing needs.
  4. Visit, measure, and compare the ground with the drawing.
  5. Check approvals and RERA yourself on the regulator's site, because the header number HRERA-PKL-FBD-939-2026 and the project page text differ slightly.
  6. Read the agreement's plot description clause before you pay.

Take your time. A plot is a long-term asset, and a careful check costs very little compared with a wrong choice.

Ask for BPTP Wa Vana plot dimensions

Tell us the frontage and size you have in mind. We will request the matching plot details from the developer and share what is released.

Buyer Questions

BPTP Wa Vana Plot Dimensions: Frequently Asked Questions


Short answers to the questions buyers ask most often on this topic.

As per BPTP's launch announcement, plot sizes at Wa Vana start from 280 sq. yards. That is about 2,520 square feet or roughly 234 square metres. The developer has not published a full list of sizes, so ask for the plot schedule in writing before you rely on any single number or size band. Keep a dated copy of whatever you receive so you can compare later versions.

Not publicly. Length and width for each plot, and the number of plots in each size band, have not been released. You can request the plot schedule from BPTP through the enquiry form. Treat any dimension quoted verbally as unconfirmed until it appears in the layout drawing or the allotment documents provided by the developer. Ask for the schedule in writing and keep it with your other papers.

Multiply square yards by 9. One square yard equals 9 square feet. For example, 280 square yards is 2,520 square feet. To get square metres, multiply square yards by about 0.836. These are general conversions, not Wa Vana prices or plot sizes. Always confirm which unit and which area figure your agreement uses. Always ask which unit and which area figure your agreement uses before you rely on the number.

No. Setbacks, which are open strips along the boundaries, reduce the area you can build on at ground level. The permitted ground coverage and floor area ratio decide how much you can construct. Ask BPTP for these rules and have an architect run a sample plan on your chosen plot before you commit to buying. Your architect can usually tell you in an hour whether a plot suits your plan.

Not necessarily. Frontage, shape, facing, road width and position can make one plot more useful than another with the same area. Pricing is on request and is indicative, subject to developer confirmation. Ask for a written cost sheet for your exact plot instead of comparing plots by area alone. Ask the same question for each plot you shortlist, since each one can differ.

They normally appear in the sanctioned layout plan and the plot schedule that the developer shares with buyers. Request both from BPTP, check them against the allotment letter and agreement for sale, and measure on site where possible. If two documents disagree, ask for a written correction before you pay any amount. Keep every version you receive, with the date, so changes are easy to spot.

Next Step

Talk to a BPTP Wa Vana Property Expert


Tell us what you are looking for and we will share the plot options, current information and a time for a site visit.

  • Plot sizes starting from 280 sq. yards
  • Indicative price on request
  • Brochure when released
  • Site visit at a time that suits you

Request a Callback

Share your details and a property expert will get back to you with the current information.

Please enter your name.
Enter a valid 10-digit Indian mobile number.
Enter a valid email address.

Your details are used only to respond to this enquiry. Pricing shared is indicative and subject to developer confirmation.