RERA Registered · Possession 2030

BPTP Wa Vana Plot Area

BPTP Wa Vana plot area has two meanings. One is the total land of 14.95 acres in Sector 80, Faridabad. The other is the size of your individual plot, which starts from 280 sq. yards. This page explains both, and how registered area differs from the area you can build on.

Two areas

The two kinds of BPTP Wa Vana plot area


People use the phrase plot area for two different things, and mixing them up leads to wrong sums. If you are new to the project, the main page on BPTP Wa Vana gives the basic facts that this section builds on.

The first is the project area. As per BPTP's announcement, Wa Vana spreads over 14.95 acres and holds 157 residential plots. The project page adds that this includes other permitted development, so not all of that land is saleable plot space.

The second is the area of a single plot. The starting size is 280 sq. yards. The final list of sizes has not been published.

A quick check shows why this matters. 14.95 acres is about 72,358 square yards, using 4,840 square yards per acre. Divide by 157 and you get roughly 461 square yards per plot. That figure is an average of all land, including roads, the central forest and other shared areas. It is not an average plot size, and it is not a promise of any size. Plots will be smaller than that average because a large part of the land goes to roads and open space.

This simple arithmetic is useful for one thing only. It tells you the project is fairly low density for its size, which fits the developer's positioning around open space and a central forest of about one acre.

When a salesperson says a plot is big, ask for the number in square yards and the plot number it belongs to. A vague word is not a measurement. The sections below show how to turn the number into something you can check, and how the figure you pay for relates to the land you can use.

It also helps to remember that plot area is only one input. Facing, road width and the neighbouring open space shape how a plot feels to live on, and those points sit on separate pages in the layout section.

Units

Units used for BPTP Wa Vana plot area


Land area in Haryana is quoted in several units. You will meet most of them while dealing with BPTP Wa Vana documents.

Common land area units (general reference)
UnitEquivalent
1 square yard9 square feet, about 0.836 square metres
1 acre4,840 square yards, about 43,560 square feet
1 hectareabout 2.47 acres

Your agreement should state plot area in one primary unit, usually square yards, and it should match the layout plan. If you see more than one unit, ask for the conversion to be shown in the document.

Do not rely on rounding. A plot quoted as 280 sq. yards should say 280, not about 280. Small rounding differences can shift the payable amount noticeably.

Registered versus usable

Registered area and usable area in a BPTP Wa Vana plot


Registered area is the land recorded in the sale deed. It is the full area inside your boundary. This is the number that carries the price.

Usable area is what you can actually put a building on. Setbacks reduce it. So do rules on ground coverage and the maximum floor area ratio. A part of your plot will always remain open.

What this means in practice

A 280 sq. yard plot has 2,520 square feet of land. The building footprint will be smaller than that. Floor area can be higher than the footprint if you build more than one level, but local rules set limits. Ask BPTP for the exact setback and coverage rules that apply, and ask an architect to show one sample plan.

The size link to price is covered in the page on BPTP Wa Vana plot sizes. It is worth reading beside this one, because area is the base number for every cost calculation.

Pricing is on request. *Indicative, subject to developer confirmation.

Worked example

A worked illustration of plot area at BPTP Wa Vana


This section uses made-up numbers to show the method. They are not Wa Vana prices or sizes.

Illustration, not a Wa Vana price. Suppose a plot has an area of 300 sq. yards and the base rate is a hypothetical 100 units per sq. yard. The base amount is 300 times 100, which equals 30,000 units. If the rate rises by 5 units, the base amount rises by 1,500 units. Area multiplies every change in rate. That is why a few extra yards matter.

Illustration only: how area scales a base amount
Plot area (sq. yards)Hypothetical rate per sq. yardBase amount
280100 units28,000 units
300100 units30,000 units
350100 units35,000 units

Real charges add more lines, such as development charges, taxes and registration costs. Those items are not published for Wa Vana. Ask for a full cost sheet for your plot, and check the area on that sheet against the layout drawing.

Verification

How to verify plot area in BPTP Wa Vana documents


You can confirm area in a few calm steps.

  1. Get the sanctioned layout plan and the plot schedule.
  2. Find your plot number and read its area.
  3. Match the area in the allotment letter and agreement for sale.
  4. Multiply length by width, using the dimensions on the drawing, and see if you reach the stated area.
  5. Ask for boundary pegs to be shown on the ground.
  6. Have the area measured by a licensed surveyor before registration if you want extra comfort.

If you want to look at how dimensions are described, the page on BPTP Wa Vana plot dimensions shows how length and width fit together.

Check the project registration yourself on the Haryana RERA portal. The header number is HRERA-PKL-FBD-939-2026, and the project page text differs slightly, so verify it directly.

Ask for areas for every plot in writing.

Pitfalls

Plot area mistakes to avoid at BPTP Wa Vana


Area errors are quiet. They tend to surface during registration or when the house plan is drawn.

  • Treating the project average of about 461 sq. yards as a plot size.
  • Comparing plots without checking frontage and shape.
  • Mixing square feet and square yards in a calculation.
  • Assuming the full area is buildable.
  • Ignoring whether a share of shared land is included in the quoted area.
  • Accepting a rounded figure instead of the exact area.

Plot sizes and layouts are subject to developer confirmation and final approvals. Renderings are artistic impressions.

Ask BPTP

Questions about BPTP Wa Vana plot area to send the developer


Ask for answers in writing so you can refer to them later.

  1. What is the range of plot areas, and how many plots are in each band?
  2. Is the plot area stated in the agreement the exact registered area?
  3. Does the quoted area include any share of common land?
  4. What setbacks and ground coverage apply?
  5. Will the area be confirmed by measurement before registration?
  6. What is the variation allowed between stated and actual area, and how is it adjusted?

The overview of residential plots at BPTP Wa Vana adds general context on what is on offer, and the main plot layouts section links to the rest of the drawings.

Share your preferred size and we will request details.

What next

Next steps once you know BPTP Wa Vana plot area


With area understood, move through these steps at your own pace.

  1. Decide the plot size band that fits your budget and house plan.
  2. Request the plot schedule, the layout and a cost sheet.
  3. Shortlist plots and visit them.
  4. Verify area, approvals and RERA.
  5. Read the agreement carefully before you pay.

Possession is expected in 2030, as per the developer, and that date may change. Prices are on request. *Indicative, subject to developer confirmation.

See the land and check the area against the drawing.

Ask for BPTP Wa Vana plot area details

Share your size range and we will request the plot schedule and area details from the developer. Pricing is on request.

Buyer Questions

BPTP Wa Vana Plot Area: Frequently Asked Questions


Short answers to the questions buyers ask most often on this topic.

As per BPTP's launch announcement, the project covers 14.95 acres in Sector 80, Faridabad, with 157 residential plots. The project page says 157 plots plus other permitted development, so not every part of the land is saleable plot area. Roads, the central forest and shared spaces take up part of it. Ask for the final saleable area figure in writing.

Plot sizes start from 280 sq. yards, as per the developer. That equals 2,520 square feet. The full range of sizes is not yet public. Ask BPTP for the plot schedule, and confirm that the area in your allotment letter is the same as the area shown on the layout drawing. Keep a dated copy of the plot schedule with your other papers.

No. Dividing 14.95 acres by 157 gives roughly 461 sq. yards of land per plot, but that includes roads, the forest and shared areas. It is only a rough density check, not a plot size. Actual plot sizes will be smaller on average and start from 280 sq. yards, as per the developer. Plot-wise figures will only be certain once the sanctioned plan and schedule are shared.

Registered area is the full land inside your boundary, recorded in the sale deed. Usable area is what you can build on after setbacks, ground coverage limits and floor area rules apply. Ask BPTP for the rules that apply, and have an architect test a sample plan on your chosen plot before you decide. It is a short check that can prevent costly design changes later.

One acre is 4,840 square yards. Multiply the acres by 4,840. For example, 14.95 acres is about 72,358 square yards. One square yard is 9 square feet. These are general conversions and they help check documents, but your agreement should state the exact plot area in one clear unit. Always confirm the unit stated in your agreement before you calculate anything.

It can, and agreements often include a clause that allows small variation and adjusts the price. Ask BPTP what variation is allowed and how it is settled. Confirm the area by measuring on site, and keep the allotment letter, layout drawing and agreement together so you can compare all three. Never accept a verbal assurance on area in place of a written clause.

Next Step

Talk to a BPTP Wa Vana Property Expert


Tell us what you are looking for and we will share the plot options, current information and a time for a site visit.

  • Plot sizes starting from 280 sq. yards
  • Indicative price on request
  • Brochure when released
  • Site visit at a time that suits you

Request a Callback

Share your details and a property expert will get back to you with the current information.

Please enter your name.
Enter a valid 10-digit Indian mobile number.
Enter a valid email address.

Your details are used only to respond to this enquiry. Pricing shared is indicative and subject to developer confirmation.